RaySafe X2
RaySafe X2

We’ve grown accustomed to intuitive interactions with our devices. After all, it’s not the device that’s most important, but what you can achieve with it that matters. Simplicity has always been a hallmark for Unfors RaySafe. But simplicity on the outside requires a lot of work on the inside. Our simplicity comes from a careful balance of advanced sensor technology paired with electronic wizardry and intelligent signal processing. The result – a device that provides accurate measurements with the ultimate in user friendliness. Right at your fingertips.

Less effort. More insight.
Life is busier. There are more demands on your time. So you need to remove the unnecessary steps in taking a measurement. Like positioning the sensor, choosing a setting, or interpreting the results. Fortunately, the X2 R/F sensor is orientation independent so the only thing you need to do is to place it in the X-ray beam and turn on the instrument. The rest is automatic - no menus, no selections.

The large, intuitive touch screen of the RaySafe X2 provides more insight with an easy-to-read display of parameters and waveforms. More in-depth information is only a swipe away.

Full range for R/F and mAs applications
Ease-of-use means you get everything you need in one exposure, with one sensor – automatically. The RaySafe X2 can be used on all R/F applications without the need to select ranges or modes. The X2 R/F sensor is capable of measuring all radiological parameters such as dose, dose rate, kVp, HVL, total filtration, exposure time, pulses, pulse rate and dose/pulse - in one exposure. Waveforms of kV and dose rate can be analyzed directly on the base unit.

The RaySafe X2 can be used on radiographic and fluoroscopic machines as well as dental machines and even measures kVp and HVL on CT. The base unit also has an optional built-in sensor for measurements of mA, mAs, exposure time, pulses, pulse rate and mA waveform. When using both the R/F and mA sensors the RaySafe X2 will display 12 parameters simultaneously including corresponding waveforms. Everything you need in one simple step.

Intuitive interface and first-class precision
The RaySafe X2 sensors and electronics are specifically designed to minimize the need for user interaction. A groundbreaking concept in sensor design and circuitry provides unsurpassed accuracy, reproducibility and sensitivity. In fact, the RaySafe X2 provides dose rate sensitivity from 1 nGy/s (5 µR/min) for pulsed fluoroscopy and 50 nGy/s (340 µR/min) for continuous fluoroscopy ensuring increased usability across more applications. Intelligent algorithms clearly indicate when a parameter is outside its specified range.

The X2 R/F sensor, with its advanced stacked sensor technology, prevents the influences of heel effects on the measurements. And its small radiological footprint minimizes the influence on the automatic exposure control of the X-ray machine. Both make it easier to position the sensor and obtain the most accurate reading.

Finally, a built-in, self-test system ensures your system is in complete working order. This provides added peace of mind and further assures accurate measurements the first time and every time.

Finding your way
The RaySafe X2 touch screen interface allows the user to view data in a comprehensive yet flexible way. The home screen displays every available parameter from the attached sensor. To zoom in on any parameter, just tap it for a larger view. Use a quick swipe to display waveforms. Navigation is made simple by using common Menu, Home and Back keys.

All exposures are saved in the base unit. In each session, you can swipe to quickly go back to previous exposures for reference or comparisons. A full session of measurements can be uploaded to the X2 View software at a later stage for more manipulation. View product information sheet on the Raysafe X2 unit.
 
See Also...
RaySafe X2
More Info 
 
Inovision Model 451P
More Info