For image-guided ion implantation

• Large 54" x 17.5" radiolucent area
• Fowler back (0° to 80°)
• Five-axis motorized tabletop positioning
• Four convenient positioning controllers
• Joystick control with variable speed
• Smooth starts and stops programmed into all motorized movements
• Low profile base for C-Arm clearance
• Accessory rails
• Standard Brachytherapy C-Arm Table accessories

Designed and equipped specifically for seed implantation procedures, the Brachytherapy C-Arm Table features motorized actuation of height, X-Y, lateral roll and Trendelenburg motions of the tabletop.

Quick and safe tabletop positioning

Multiple positioning control units with pre-programmed features ensure quick and safe tabletop positioning during any phase of a procedure.

The Fowler Back, incorporates a touch-handle lock/unlock

The Fowler back, adjustable to an 80° angle (20°, 30°, 40°, 50°, 60°, 70°, 80°) incorporates a touch-handle lock/unlock mechanism for effortless patient positioning. The table comes equipped with removable x-ray film cassette tray and x-ray grid. Standard accessories include rail-mounted knee crutches and arm boards, IV pole, patient transfer extension, and radiolucent extension. The radiolucent extension provides capability for brachytherapy treatment involving the upper body, as well as other general C-Arm applications.

Functional design provides complete access with reduced radiation exposure

Stability, access, and precise, quiet, vibration-free positioning make the Brachytherapy C-Arm Table ideal for image-guided procedures. The narrow Fiberesin™ tabletop is cantilevered to accommodate portable or ceiling suspended C-Arms. Radiolucent areas are free of cross members, allowing full fluoroscopic visualization and unobstructed C-Arm positioning. Functional design provides complete access with reduced radiation exposure to clinicians. Patient comfort and stability are assured by two-inch thick table padding and a pair of adjustable straps with Velcro® hook and loop fastening.

Both AC and battery power are standard. When operating on battery, there are no power cords to catch on feet or block table wheels. Battery charging can be accomplished during off-hours by plugging in the AC power cord. An optional battery with separate charging unit can provide continuous cordless operation.

Specifications

• Dimensions: 84.5" l x 25.5" w (214.6 x 64.8 cm) with OR accessory rails
• Tabletop: 53" l x 21" w (134.6 x 53.3 cm); 84" l (213.4 cm) with extension
• Lightweight Extension (For patient transfer only, not for imaging.):
  26.5" l x 21" w (67.3 x 53.3 cm)
• Radiolucent Extension: 31" l x 25.5" w (78.7 x 64.8 cm) with OR accessory rails
• Radiolucent Area: 54" l x17.5" w (137.2 x 44.5 cm)
• Tabletop Material: Three Fiberesin™ sections – each with individual 2" mattress
• Table Sections: Four Sections: Adjustable Fowler back 0°to 80°; abdominal section with cutout; radiolucent removable extension and a lightweight non-imaging transfer extension for transferring patients on/off the table
• Mattress: Individual 2" thick (5 cm), one for each section
• Motions:
  - Height Adjustable: 34" to 43.5" (86.4 to 110.5 cm)
  - Tabletop X Motion (head-to-toe): 20" (51 cm)
  - Tabletop Y Motion (side-to-side): 10" (25.4 cm)
  - Trendelenburg: 0° to 20°
  - Reverse Trendelenburg: 0° to 20°
  - Lateral Roll: 0° to 20°
  - Fowler Back: Adjusts from 0° to 80° with touch handle lock/unlock
• Controls:
  - Hand Control: activates all motions
  - Foot Control: activates all motions
  - Main Control Panel: LCD screen displays actual tabletop position (all axes) in real time, and provides menus and prompts for other functions
  - Joystick Controller: for motorized X-Y positioning
• X-Ray Film Tray: Removable film cassette tray for 14" x 17" film with cassette mask for 10" x 12" film. Film cassette tray can be removed from either side of the table.
• X-Ray Grid: Removable X-Ray grid, 103 line, 8:1 ratio
• Wheels:
  - Foot End – 3" (7.62 cm) locking swivel casters
  - Head End – 5" (12.7 cm) swivel casters with central locking
• Accessory Rails: Standard OR accessory rails 1.125" x .375"
  (2.86 x .95 cm) on table (rails also on table imaging extension)
• Patient Restraints: Two body straps, two ankle straps
• Finish: Powder coat
• Patient Capacity: 400 lb (181.4 kg); weight tested to four times the patient load rating.
• Power: 115 VAC or 230 VAC and Battery. Battery automatically charges when table is plugged in. An additional battery can be charged with optional wall-mounted charger.
• Standard Accessories:
  - rail mounted knee crutches
  - rail mounted IV pole
  - rail mounted arm boards
  - radiolucent extension
  - transfer extension
  - bellows skirt (disposable, 250/roll) and dispenser
• Warranty: One year
• Certifications: ETL and cETL listed to UL-2601-1®, CAN/CSA© C22.2 No.: 601-1-M90, EN 60601-1, IEC 60601-1-2:2001-09