Owens Scientific -- Atomlab™ 200 Dose Calibrator

Small Business / Woman Owned, HUB Certified - State of Texas

23230 Sandsage Lane
Katy, Texas 77494-4207
Phone: (281) 394-2311
Fax: (281) 394-2522

Home

Manufacturers

Apron Check Software

About Us

Medical Instruments

  Diagnostic Radiology
  Dosimetry
  Hand Held Survey Meters
  Health Physics
  Lead Aprons
  Mammography
  Medical Physics
  Nuclear Medicine
  Radiation Safety
  Radiation Therapy
  Radiation Survey Meters
  Tables and Accessories
  Ultrasound
  X-Ray Test Devices

Homeland Security

  Area Monitors
  Response Kits
  Hand Held Survey Meters
  Portal Monitors
  Waste Monitors
  Gate Monitors
  Personal Dosimeters

Special Equipment

Calibration Services
Scintillation Detectors

Continuing Education

Nursing
Radiology

Software

Lead Apron Inspection

Nuclear Medicine : Atomlab™ 200 Dose Calibrator

* All functions microprocessor controlled * Ultra-fast response * Automatic range selection Ranges up to 9.999 Curies of Tc-99m or 2.5 Curies of F-18 * Pre-programmed for the most commonly used radionuclides * Display in Curies or Becquerels * Automatic background subtraction and zeroing at the touch of a button * Remote ionization chamber with .25" (.64 cm) lead shielding and 10-foot (3.05 m) cable * Self-diagnostic software * Daily constancy isotope keys * Electronic power supply (no battery in chamber) * Industry exclusive two-year warranty * Inventory control of 25 samples, correcting for volume, activity, and moly concentration * Volume determination and future dose computations * Pharmaceutical quality control programs * Isotope decay projection * Automatic linearity calculations using attenuator tubes * RS-232 bi-directional serial communications port * Dot matrix printer * ETL to UL 3101-1 and cETL to CAN/CSA C22.2 No. 1010.1-M92 The Atomlab™ 200 provides fast, accurate radionuclide activity measurements with performance that easily surpasses the most stringent regulatory requirements. The unit is simple to operate. There are 13 isotope selection keys, 10 are pre-programmed for the most commonly used radionuclides and 3 are user defined. There are 94 isotope-specific dial values listed in the manual, including Y-90 and Sr-89. Any key can be reprogrammed by the user for a desired isotope. Activity is displayed on a LED readout in either Curie or Becquerel units. Background correction and zero adjustment are performed at the touch of a button. Range selection is automatic. Activity measurements are performed by a microprocessor controlled electrometer located within the detector assembly of the ionization chamber. The chamber is shielded with .25" (.64 cm) lead. It can be located up to ten feet away from the display unit. Chamber bias is generated within the display unit by an electronic high voltage supply, eliminating the need for expensive battery changes. The Atomlab™ 200 Dose Calibrator provides inventory management, quality assurance, and record-keeping functions. The dot matrix printer allows hard copy records to be produced for all functions. The microprocessor-driven memory provides inventory control for 25 samples, storing and correcting the volume, activity, and moly concentration. When drawing a dose from an inventory sample, the Atomlab™ 200 will display the required volume for a specific dose and, if required, print a decay chart showing required volumes for that dose at future times. The Atomlab™ 200 facilitates dose calibrator quality assurance with automatic constancy and linearity functions. The system stores and decay corrects Co-57 and Cs-137 reference sources and compares the measured activity to the calculated activity for the daily constancy test. Quarterly linearity tests are simplified by software which guides the user through the attenuator tube procedure (regardless of which brand you use), stores all values, and does all calculations. For radiopharmaceutical quality control, the Atomlab 200 performs all counting and calculations for paper chromatography tests, computing the percentages of free pertechnetate, hydrolyzed reduced Tc-99m, and labeled radiopharmaceuticals. The RS-232 port enables the Atomlab™ 200 Dose Calibrator to communicate with most commercially available nuclear medicine management systems. An industry exclusive two-year warranty is standard.

Site created & maintained by
Tux Studios.Com

New Items

The newest meter!


IdentiFINDER Digital Spectrometer

Inovision Model 451P


Pressurized µR Ion Chamber

Dual Purpose Table


Accommodates Ultrasound and Echocardiography Procedures

Inovision Model 451B


Ion Chamber Survey Meter with Beta Slide