Fully motorized positioning for all
image-guided procedures

• Low attenuation carbon fiber tabletop,
  with innovative contour design
• High-speed actuators assure quick five axis motorized tabletop positioning
• Four convenient positioning controllers
• Joystick control with variable speed
• Smooth starts and stops programmed into all motorized movements
• 500-lb patient capacity
• Face cutout for comfortable prone positioning
• Low profile base for C-Arm clearance
• Accessory rails

The 830 is a versatile, full function table featuring an extra-large radiolucent area, motorized actuation of height, X-Y, lateral roll and Trendelenburg motions of the tabletop and the catheter tray extension.

Main control panel, portable hand-held and foot-operated controllers

Multiple positioning control units with pre-programmed features ensure quick and safe tabletop positioning during any phase of a procedure. The rail-mounted main control panel, portable hand-held controller, and foot-operated controller can be positioned for convenient access from any point around the table.

The radiolucent area is free of cross members

Designed for procedures where stability, access, and
precise, quiet, vibration-free positioning are essential, the 830 is an ideal choice for image-guided procedures. A cantilevered low
attenuation carbon fiber tabletop accommodates portable or ceiling-suspended C-Arms. The radiolucent area is free of cross members, allowing full fluoroscopic visualization and unobstructed C-Arm positioning. Functional design provides complete access with reduced radiation exposure to clinicians. Patient comfort and stability are assured by two-inch thick table padding and three adjustable straps with Velcro® hook and loop fastening. A face cutout is provided for prone positioning.

Both AC and battery power are standard. When operating on battery, there are no power cords to catch on feet or block table wheels. Battery charging can be accomplished during off-hours by plugging in the AC power cord. An optional battery with separate charging unit can provide continuous cordless operation.

Specifications

• Dimensions: 104" l x 26" w (260 x 66 cm) with OR accessory rails
• Tabletop: 101" l x 24" w (252 x 61 cm)
• Catheter Tray Extension (removable): 18" l x 24" w (45.7 x 61 cm) non-radiolucent
• Radiolucent Area:
  - 51" l x 24" w (128 x 61 cm) unobstructed head to accessory rail
  - 20" l x 17.5" w (50.8 x 44 cm) additional, between accessory rails
• Radiolucent Area, Total Length: 71" l (178 cm)
• Tabletop Material: Carbon fiber with integral head section
• Mattress: 2" thick (5 cm)
• Attenuation:
  - Tabletop: .7 mm Aluminum equivalence
  - Mattress: .5 mm Aluminum equivalence
• Motions:
  - Height Adjustable: 33.5" to 43.5" (84 to 109 cm)
  - Tabletop X Motion (head-to-toe): 20" (51 cm)
  - Tabletop Y Motion (side-to-side): 10" (25.4 cm)
  - Trendelenburg: 0° to 20°
  - Reverse Trendelenburg: 0° to 20°
  - Lateral Roll: 0° to 20°
• Controls:
  - Hand Control: activates all motions
  - Foot Control: activates all motions
  - Main Control Panel: LCD screen displays actual tabletop position (all axes) in real time, and provides menus and prompts for other functions
  - Joystick Controller: for motorized X-Y positioning
• Wheels:
  - Head End – 3" (7.62 cm) swivel casters, integral locking system on base
  - Foot End– 5" (12.7 cm) swivel casters with central locking
• Accessory Rails: Standard OR accessory rails 49.5" x 1.12" x .375"
  (124 x 2.86 x .95 cm) mounted near foot end of table
• Patient Restraints: Three body straps
• Finish: Powder coat
• Patient Capacity: 500 lb (227 kg); weight tested to four times the patient load rating.
• Lift Capacity: May vary between 460 lb - 500 lb
  (209-227 kg) based on line voltage
• Power: 115 VAC or 230 VAC and Battery. Battery automatically charges when table is plugged in. An additional battery can be charged with optional wall-mounted charger.
• Standard Accessory:
  - Catheter Tray Extension (removable)
  - Bellows Skirt (disposable, 250/roll) and dispenser
• Warranty: one year
• Certifications: ETL and cETL listed to UL-2601-1®, CAN/CSA© C22.2 No.: 601-1-M90, EN 60601-1, IEC 60601-1-2:2001-09