Small Business / Woman Owned, HUB Certified - State of Texas
23230 Sandsage Lane
Katy, Texas 77494-4207
Phone: (281) 394-2311
Fax:     (281) 394-2522
Home
Manufacturers
Apron Check Software
Contact Us
About Us

Medical Instruments
  Diagnostic Radiology
  Dosimetry
  Hand Held Survey Meters
  Health Physics
  Lead Aprons
  Mammography
  Medical Physics
  Nuclear Medicine
  Radiation Safety
  Radiation Therapy
  Radiation Survey Meters
  Tables and Accessories
  Ultrasound
  X-Ray Test Devices
Homeland Security
  Area Monitors
  Response Kits
  Hand Held Survey Meters
  Portal Monitors
  Waste Monitors
  Gate Monitors
  Personal Dosimeters
Special Equipment
  Calibration Services
  Scintillation Detectors
Continuing Education
  Nursing
  Radiology
Software
  Lead Apron Inspection


Ultrasound : Ultra Pro Ultrasound Table
Ultra Pro Ultrasound Table Ultra Pro Ultrasound Table
Model 058-720 and 058-725

Sonographer-friendly design.

  • Ergonomically designed to help prevent musculoskeletal injuries
  • Contoured tabletop design for optimal probe positioning
  • 500-lb lift capacity
  • Open frame design for greater accessibility
  • Motor-controlled adjustments – including Fowler back, height, Trendelenburg motions and auto level
  • Vascular scanning arm board (optional) can be mounted to either side of the table
  • Side rails (optional) pivot out of the way to allow unobstructed patient access
  • Equipped with hand controller to actuate table positions
  • Optional table accessories include foot controller, retractable stirrups, vascular scanning arm board, pivoting side rails, IV pole and paper dispenser

The Ultra Pro Ultrasound Table is a dedicated table for all general ultrasound procedures including OB/GYN. Choose from an assortment of table options to customize the table to suit your department needs.

Extra wide with 500-lb lift capacity, contoured tabletop to maximize patient scanning and a vast height range down to 23", chosen for wheelchair transfers, the Ultra Pro easily accommodates patients with ambulatory difficulties and the bariatric population.

Ergonomically designed to suit both patient and sonographer, the table’s height range allows seated or standing work positions while the pivoting side rails allow comfortable shoulder, arm and hand positions when scanning. There are no barriers between sonographer and patient, allowing correct scanning posture to prevent musculoskeletal injury. The open frame design allows sonographers to get closer to the patient, especially useful for carotid imaging or long leg arterial scanning. The motorized Fowler back is infinitely adjustable up to 80° via hand or foot controller.

For the patient, comfort is assured through lengthy procedures with an amply thick mattress and a multitude of comfort-driven design details. For example, the retractable stirrups can extend extra long to accommodate taller or larger patients; the leg section drops down to 40° for patients with circulatory issues and 80° for stirrup access. Biodex tables are so accommodating, they actually reduce the total amount of time required to achieve a quality image.

The Ultra Pro Ultrasound Table is equipped with a motor-controlled hand controller to actuate table positions, 2"- and 3"-thick table padding covered in easy-to-clean Naugahyde®, two patient restraining straps with Velcro® hook and loop fasteners, five-inch swivel casters and a central locking system, accessible from either side of the table, to secure table position.

Additional accessories are available, including foot controller, retractable stirrups, vascular scanning arm board, pivoting side rails and IV pole.

Specifications

  • Dimensions: 70" l x 30" w (178 x 76.2 cm); 35.5" w (90.2 cm) with side rails; 18" w (45.72 cm) at narrow section
  • Drop-Down Leg Section: 12.6" l (32 cm)
  • Height Adjustable: 23" to 39" (58.4 to 99 cm
    • )
  • Tabletop: Three primary sections; torso section features contoured design with Fowler back positioning, center section remains fixed and leg section drops down to 40° and 80° for stirrup access
  • Mattress: Torso section 2" (5 cm) thick, center and leg sections 3" (8 cm) thick; foam rubber pad covered with durable Naugahyde®
  • Upholstery Color: Graphite
  • Motions:
    - Height Adjustable: 23" to 39" (58.4 to 99 cm)
    - Trendelenburg: 0° to ±15°
    - Fowler Back: 0° to 80° infinitely adjustable
  • Controls:
    - Hand Control: Activates height, Trendelenburg motions, Fowler back and auto level motions
    - Foot Control (optional): Activates height, Trendelenburg motions, and Fowler back
  • Wheels: 5" (12.7 cm) swivel casters; central floor locking system
  • Patient Restraints: Two body straps
  • Finish: Powder coat
  • Patient Capacity: 500 lb (227 kg); weight tested to four times the patient load rating.
  • Weight: 335 lb (152 kg)
  • Power: 115 VAC or 230 VAC
  • Warranty: One year
  • Certifications: ETL and ETL© Listed to UL60601-1 and CAN/CSA C22.2 No. 601.1-M90 and EN 60601-1 standards.
 


Site created & maintained by
Tux Studios.Com

© Owens Scientific, Inc., Houston,Texas
Advanced Search

New Items
Unfors DXR+
Direct X-ray Ruler
 
Frustrated with lead apron inspections?
Easily Enter, Organize and Report your Lead Apron Tracking Information
 
Inovision Model 451B
Ion Chamber Survey Meter with Beta Slide
 
Inovision Model 451P
Pressurized µR Ion Chamber